Debut Carbon Esprit // PS01 Wave Turntable // White
PS01-Wave is a joint effort between Pro-Ject Audio Systems and Parov Stelar based on the highly acclaimed Debut Carbon Esprit (DC), which sets the standard of performance among reasonably priced turntables.
PS01-Wave is a real eye-catcher and meets the growing demand of all fans of Parov Stelar and first-rate sound! The carbon fiber tonearm ensures superior stiffness and significantly reduced resonance compared to metal tonearms. It's normally used in high-end tonearms that cost much more. Together with an acrylic platter the carbon tonearm offers outstanding sound quality! The approved belt drive design offers a low-noise AC motor with effective TPE (Thermo Plastic Elastomer) motor decoupling and an ultra precision frequency DC-driven AC generator for ultimate speed stability and without unwanted vibration. PS01-Wave was made in a limited production run of only 1000 pieces worldwide!
Multi Density Fiber (Mdf)
16.3"L x 12.6"W x 4.6"H
— Warranty: Manufacturer's 2 Years
— Must-have For Fans Of Parov Stelar And Vinyl
— Exclusive Design With 7 Printing Layers
— 8.6” Carbon Tonearm
— Heavy Non Resonant Acrylic Platter
— DC Power Supply With Synchronous AC Motor
— TPE Motor Suspension
— Magnetic Cartridge 2M Red From Ortofon
— High-tech Damping Feet Made From TPE
— Dust Cover Included
— Handmade In Europe
— Turntable Only; Preamp, Amplifier/Receiver, & Speakers Not Included
— Speed: 33, 45 (Manual Speed Change)
— Drive Principle: Belt Drive
— Platter: 300 Mm Acrylic Platter
— Mains Bearing: Stainless Steel
— Wow & Flutter 33: ±0.19%, 45: ±0.17%
— Speed Drift 33: ±0.60%, 45: ±0.70%
— Signal To Noise: 68dB
— Tonearm: 8.6” Carbon Fiber
— Effective Arm Length: 218.5mm
— Effective Arm Mass: 6.0g
— Overhang: 18.5mm
— Tracking Force: 10 - 30 MN
— Standby Power Consumption: < 1 Watt
— Weight: 10.8 lb
This 'table does require a preamp. Either an outboard one will work or the PHONO input on your amp/receiver. Yes, it uses RCA output cables!Does the unit lift the arm after record is over?
The turntable is fully manual and does not lift automatically. However, it has a dampened cueing level that allows you to gently lower the arm at the beginning of the disc and raise it at the end (instead of using your hands!).Who is the artwork made by?
The artwork was made by Parov Stelar!
*Continental US only. Surcharges apply to HI, AK and Canada
Shipping AvailabilityUnited States
Shipping PolicyFREE Standard Shipping
Ship In1-2 weeks
Return PolicyFinal sale, not eligible for return or cancellation